7 Series E38 730iL (M60-1) SAL
Remove oil pump from oil supply housing with cotter pin extractor
and plastic hammer.
Installation:
Insert dowel pin (1) in oil supply housing.
Replace O-ring (2).
For ease of installation, coat O-ring with Vaseline.
Screw assembly tool (3) (two M6x60 screws without screw
head) in pump housing.
Remove pump wheel (1) and ring gear (2) from pump housing.
Installation:
Insert pump wheel and ring gear with Vaseline in pump
housing.
When installed, markings on pump wheel and ring gear must
be clearly visible.
Lift out snap ring (1).
Pry out shaft seal (2) with a screwdriver.
Remove thrust washer (3).
RA Dismantling and assembling automatic transmission (A5S560Z)
BMW AG - TIS
05.02.2013 15:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
