7 Series E38 730iL (M60-1) SAL
32 21 080
Removing and installing idler arm
Unscrew and remove splash guard.
Unfasten nut and press off ball joint with special tool 32 1 190.
Installation:
Bore and tapered spigot free of grease.
Replace self-locking nut.
Brace on hexagon socket if necessary.
Tightening Torque,
refer to Technical Data 32 21 3AZ
Installation:
Replace self-locking nut.
Tightening Torque,
refer to Technical Data 32 21 7AZ
1
Bolt
2
Idler arm
3/4 Self-locking nut
5
Front axle support
Caution!
If the idler arm is replaced, adjust the pitman arm,
refer to 32 21 510
RA Removing and installing idler arm
BMW AG - TIS
05.02.2013 16:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
