7 Series E38 730iL (M60-1) SAL
32 21 231
Replacing left or right tie rod
Caution!
After assembly, measure/adjust front axle alignment.
Unfasten nut.
Press off track rod with special tool 32 1 190.
Installation:
Bore and tapered spigot free of grease.
Replace self-locking nut.
Brace on hexagon socket if necessary.
Tightening Torque,
refer to Technical Data 32 21 3AZ
Clamping screw loose.
Twist and remove tie rod.
Installation:
Coat tie rod adjusting thread with special grease, refer to
BMW Parts Service
Tightening Torque,
refer to Technical Data 32 21 4AZ.
RA Replacing left or right tie rod
BMW AG - TIS
05.02.2013 16:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -