7 Series E38 730iL (M60-1) SAL
E38 long version only:
Note:
Position of butylene tape (1) on sound insulation (2).
Caution!
When working with adhesive cleaners in enclosed rooms:
Ensure room is well ventilated.
The adhesive areas must be dry and free from dust and
grease.
After cleaning, do not touch the adhesive areas with bare
hands.
If necessary, clean the specified adhesive area with adhesive
cleaner (sourcing reference: BMW Parts Service).
Air drying time: 1 minute
Lay butylene tape with a diameter of 6 mm (sourcing reference:
BMW Parts Service) in specified adhesive area.
Heat butylene tape (hot air blower) and press down firmly on
sound insulation all round.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation in rear door, left or right
BMW AG - TIS
05.02.2013 19:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -