bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Removing And Installing Sun Roof Lid|Page 2481 > < 8 RA Removing And Installing Sun Roof Lid
Page 2
background image

Caution!

Rapid sliding of floating roof liner can damage the mechanism
(guide) of slide/tilt sunroof cassette. Do not move floating roof
liner with force.

Slowly slide floating roof liner right back (with clean hands, or
wearing protective gloves).

Shut sun roof (neutral position).

Caution!

Slide/tilt sunroof can now no longer be moved in "OPEN"
direction (damage to mechanism).

Unscrew nuts.

Lift slide/tilt sunroof lid upwards and backwards to remove.

Installation:

Replace nut (micro-encapsulation) or install old nut with
Loctite 270 (refer to BMW Parts Service).

Tightening torque,

refer to Technical Data 54 12 2AZ

Installation:

Install slide/tilt sunroof lid, then locate adjusting lever (1) at
front left and right accurately in sliding keyway (2).

RA  Removing and installing sun roof lid

BMW AG - TIS

05.02.2013  20:32

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

8 RA Removing And Installing Sun Roof Lid|Page 2481 > < 8 RA Removing And Installing Sun Roof Lid