7 Series E38 730iL (M60-1) SAL
With a new Telestart receiver both hand transmitters must be reinitialized.
1.
Interrupt voltage supply of receiver by pulling fuse as per circuit diagram for approx. 10 seconds.
2.
Insert fuse. Briefly actuate switch-off rocker switch of hand transmitter within next 3 seconds.
3.
Briefly actuate switch-on rocker switch of hand transmitter within next 5 seconds.
4.
After another 3 seconds remote control is ready for operation.
5.
Briefly actuate switch-off rocker switch of hand transmitter; switch-on indicator lamp then no longer flashes.
6.
Then carry out function check.
RA Removing and installing / replacing receiver/Telestart of independent heating
BMW AG - TIS
05.02.2013 22:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
