7 Series E38 730iL (M60-1) SAL
64 22 190
Removing and installing / replacing fresh-air
grill in rear of car
Depending on the equipment version, a heater control or a finisher
strip may be installed. All versions are removed in the same
manner.
Press fresh-air grill (1) and heater control (2) apart somewhat and
clip heater control (2) out of guide groove at top.
Pull fresh-air grill (1) upward and screw out heater control (2).
Push fresh-air grill (1) downward by dimension A (approx. 30 to 40
mm) and out of recesses of guide groove.
Installation note:
Guide fresh-air grill centered into recesses (1) of guide groove
and press completely upward. Then install finisher strip or
heater control.
RA Removing and installing / replacing fresh-air grill in rear of car
BMW AG - TIS
05.02.2013 22:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
