7 Series E38 735i (M62) SAL
Important!
Never open up the special tool to a point where the spring
holders make contact with the lower spring plate, the upper
spring coil and/or the support bearing. Failure to comply with
this can damage the special tool and/or the spring.
Only relieve tension on special tool until spring coils can move
freely. Remove spring strut.
After installation:
•
Perform chassis alignment check
•
Carry out steering angle sensor adjustment
RA Replacing front left or right spring strut shock absorber
BMW AG - TIS
07.02.2013 03:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -