bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing, Sealing Or Replacing Upper Oil Sump Section (M67)|Page 528 > < 1 RA Removing And Installing, Sealing Or Replacing Upper Oil Sump Section (M67)|Page 526
Page 6
background image

Caution!

To prevent damage to airbag coil spring in steering column:
After completing work, remove steering wheel and center
airbag coil spring.

Remove and install steering wheel,

refer to 32 33 000.

Release steering spindle on steering gear.

These tasks are described in the repair instructions for Removing
and installing complete front axle,

refer to 31 10 000.

Release nuts (1) on engine mount on left and right.

Release screw (1) on automatic transmission.

Detach ATF lines (2).

Installation:

Replace O-rings if damaged.

RA  Removing and installing, sealing or replacing upper oil sump section (M67)

BMW AG - TIS

10.02.2013  02:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 6 -

1 RA Removing And Installing, Sealing Or Replacing Upper Oil Sump Section (M67)|Page 528 > < 1 RA Removing And Installing, Sealing Or Replacing Upper Oil Sump Section (M67)|Page 526