7 Series E38 740d (M67) SAL
13 53 565
Removing and installing/replacing pressure
sensor on fuel rail of injection system (M67)
Read out fault memories of DDE control units. Switch off
ignition.
Remove and install fuel rail of injection system,
refer to 13 53 590.
Release pressure sensor (1) on fuel rail (2).
Tightening torque,
refer to Technical Data 13 53 12AZ.
RA Removing and installing/replacing pressure sensor on fuel rail of injection syst
BMW AG - TIS
10.02.2013 03:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -