7 Series E38 740i (M60-2) SAL
11 12 004
Removing and installing/sealing both cylinder
head covers (M60)
Note instructions on connecting and decoupling battery,
refer to General Information MG12
Disconnect negative battery lead.
Pry out sealing cap. Unscrew nuts.
Remove acoustic cover.
Remove upper section of suction filter housing style with mass air
flow sensor.
Remove covers from ignition coils.
Remove ignition coils,
refer to 12 13 511
RA Removing and installing/sealing both cylinder head covers (M60)
BMW AG - TIS
11.02.2013 06:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
