7 Series E38 740i (M60-2) SAL
Remove suction-filter housing with air-mass sensor,
refer to 13 71 000
Unfasten dipstick guide from right timing case cover.
Unfasten top left and right nuts on engine mount.
Fit special tool 00 0 200 to special
tool 00 0 201 / 202 / 204 / 208 and attach.
Note:
The supports (1) of special tool 00 0 208 must make
contact with the screws on the side walls.
Secure special tool 11 0 000 to special tool 00 0 200.
RA Removing and installing/replacing upper section of oil pan (M60)
BMW AG - TIS
11.02.2013 06:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -