7 Series E38 740i (M60-2) SAL
Unfasten return line from oil pan.
Installation:
Replace sealing ring.
For tightening torque,
refer to Technical Data 11 42 5AZ
Unfasten steering spindle from steering gear.
This operation is described in section on removing and installing
the steering gear,
refer to 32 13 060
Unfasten bracket for hydraulic line from front axle support.
Brace front axle support with special tool 00 2 030 in
conjunction with special tool 31 2 220.
Unfasten front axle support from engine support and lower
approx. 60 mm,
refer to 31 11 001
Unfasten screws inside oil pan.
Remove oil pump,
refer to 11 41 000
RA Removing and installing/replacing upper section of oil pan (M60)
BMW AG - TIS
11.02.2013 06:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -