7 Series E38 740i (M60-2) SAL
11 14 085
Removing and installing/sealing or replacing
top right timing case cover (M60)
(Cylinder bank 5-8)
Remove right cylinder head cover. This operation is
described in section on removing and installing/sealing
both cylinder head covers,
refer to 11 12 004
Remove piston for chain tensioner,
refer to 11 31 090
If necessary, remove tubes for secondary air intake,
refer to 11 72 200
Remove camshaft sensor.
Unfasten top screw from dipstick tube.
RA Removing and installing/sealing or replacing top right timing case cover (M60)
BMW AG - TIS
11.02.2013 06:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -