7 Series E38 740i (M60-2) SAL
Unfasten timing case cover.
Installation:
Replace sealing ring in cylinder head for oil supply of chain
tensioner.
Installation:
Ensure dowel sleeves (1) are correctly located.
Coat contact surface edge of joint between cylinder head and
cylinder head gasket with liquid gasket Hylomar SQ32 M
(refer to BMW Parts Service).
Installation:
Keep sealing faces clean and free of oil.
Replace seals.
Caution!
Note correct installation direction for gaskets.
Install gaskets with sealing bead (1) facing the timing case
cover.
RA Removing and installing/sealing or replacing top right timing case cover (M60)
BMW AG - TIS
11.02.2013 06:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -