7 Series E38 740i (M60-2) SAL
Remove main bearing covers 1 ... 5.
Lever out crankshaft.
Caution!
Note grinding stage of crankshaft,
refer to Technical Data
Check bearing clearance on crankshaft:
Install main bearing shells in engine block,
refer to 11 21 531
Fit special tool 00 2 590 (Plastigage Type PG 1) to the oil-
free crankshaft.
Note:
Do not twist crankshaft.
RA Replacing crankshaft (M60)
BMW AG - TIS
11.02.2013 06:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -