7 Series E38 740i (M60-2) SAL
Unfasten the accessible three screws in the exhaust and intake
camshaft on cylinder bank 1-4 approx. 1/2 a turn.
Unfasten the accessible three screws in the exhaust and intake
camshafts on cylinder bank 5-8 approx. 1/2 a turn.
Turn over engine once.
Caution!
Do not turn the engine back.
Secure crankshaft with special tool 11 2 300 in TDC
position of first cylinder.
Remove special tool 11 2 300 before switching on the engine.
Note:
Camshaft position on cylinder bank 1-4.
RA Adjusting timing of camshaft(s) (M60)
BMW AG - TIS
11.02.2013 06:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
