7 Series E38 740i (M60-2) SAL
Tighten down the remaining three screws in the exhaust and
intake camshafts in cylinder bank 5-8 firmly.
Tightening torque,
refer to Technical Data 11 31 3AZ
Unfasten and remove special tool 11 3 390.
Assemble engine.
RA Adjusting timing of camshaft(s) (M60)
BMW AG - TIS
11.02.2013 06:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -