7 Series E38 740i (M60-2) SAL
Remove special tool 11 2 300.
Turn over engine once.
Tighten down remaining three screws on exhaust and intake
camshafts on cylinder bank 1-4 firmly.
Tightening torque,
refer to Technical Data 11 31 3AZ
Loosen special tool 11 3 390 and remove.
Assemble engine.
RA Replacing left camshaft (M60)
BMW AG - TIS
11.02.2013 06:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -