7 Series E38 740i (M60-2) SAL
Removal
Removal of camshaft is described separately from installation.
Assembly sequence for removal and installation is different.
Crank engine at central bolt in direction of rotation until the first
cylinder is in TDC position.
Unfasten the accessible three screws in the exhaust and intake
camshaft on cylinder bank 5-8 approx. 1/2 a turn.
Crank engine once enginewise up to TDC position of first cylinder.
RA Replacing right camshaft (M60)
BMW AG - TIS
11.02.2013 06:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -