7 Series E38 740i (M60-2) SAL
Fit special tool 11 0 211 from below in special tool 11 1 065
and secure with special tool 11 1 045.
Press down valve spring on spring cap, top, and remove valve
keys.
Remove valve spring and plate spring.
Installation:
If one spring of the spring set (inner or outer spring) is
damaged or broken, both springs must be replaced. Only use
inner and outer springs of the same make and with the same
colour code.
Installation sequence:
(1)
Valve
(2)
Valve-stem seal
(3)
Lower plate spring for outer spring
(4)
Lower plate spring for inner spring
(5)
Outer spring
(6)
Inner spring
(7)
Upper plate spring
(8)
Valve collets
RA Replacing all valve springs
BMW AG - TIS
11.02.2013 06:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -