7 Series E38 740i (M60-2) SAL
Installation:
Replace sealing ring in oil pump.
Installation:
Tighten cap screw firmly home in oil pump.
Installation:
Fit oil pump and tighten down using screws (1) and (2).
Installation:
Fit sprocket with chain and tighten nut.
Tightening torque,
refer to Technical Data 11 41 4AZ
RA Removing and installing/replacing oil pump (M60)
BMW AG - TIS
11.02.2013 06:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -