7 Series E38 740i (M60-2) SAL
11 42 020
Removing and installing / replacing complete
main flow oil filter (M60)
Unfasten oil filter cover to allow oil to flow out of main flow oil filter
housing and back into oil pan.
This operation is described in section on BMW engine oil service,
refer to 00 00 249
Disconnect plug connection on oil pressure switch.
Unfasten bracket on oil lines.
Remove oil lines from main flow oil filter housing.
Installation:
Replace sealing rings.
Unfasten main flow oil filter housing from bracket.
RA Removing and installing / replacing complete main flow oil filter (M60)
BMW AG - TIS
11.02.2013 06:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -