7 Series E38 740i (M60-2) SAL
11 51 000
Removing and installing or replacing water
pump
Drain off coolant and dispose of correctly.
Installation:
Bleeding cooling system and checking for water leaks,
refer to 17 00 039
Remove vibration damper,
refer to 11 23 010
If necessary, remove tubes for secondary air induction,
refer to 11 72 200
Release belt pulley.
Remove coolant hose between expansion tank and water pump.
Remove coolant hose to lid on thermostat housing.
Remove lid to thermostat housing and thermostat.
Unfasten screws and remove water pump.
RA Removing and installing or replacing water pump
BMW AG - TIS
11.02.2013 06:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -