7 Series E38 740i (M60-2) SAL
Unfasten lock nut (1), pressure screw (2), and nut (3).
Remove pressure plate and air induction tubes.
Installation:
Sealing faces clean and free of debris.
Replace metal gasket.
Installation:
Tighten pressure plate with nut (3).
Preload air induction tubes with pressure screw (2).
For tightening torque,
refer to Technical Data 11 72 2AZ
Secure pressure screw (2) with lock nut.
For tightening torque,
refer to Technical Data 11 72 2AZ
RA Removing and installing / sealing or replacing tubes for secondary air induction
BMW AG - TIS
11.02.2013 06:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -