7 Series E38 740i (M60-2) SAL
12 12 011
Replacing all spark plugs (M60, M62)
Switch off ignition.
Remove ignition coils.
Unscrew spark plugs with special tool 12 1 171.
Installation:
Tighten down spark plugs with special tool 12 1 171 and
special tool 12 1 200 (torque limiter).
Without special tool 12 1 200, observe tightening torque.
Tightening Torque,
refer to Technical Data 12 12 1AZ.
RA Replacing all spark plugs (M60, M62)
BMW AG - TIS
11.02.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -