7 Series E38 740i (M60-2) SAL
12 14 520
Replacing impulse sensor (M60)
Interrogate fault memory of DME control unit.
Switch off ignition.
Remove seal caps (1) and unfasten nuts (2).
Remove cover from cylinder head cover.
Disconnect plug-in connection (3).
The impulse sensor is located beside the incremental gear.
RA Replacing impulse sensor (M60)
BMW AG - TIS
11.02.2013 06:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -