7 Series E38 740i (M60-2) SAL
12 41 020
Removing and installing/replacing starter
(M60, M62)
Switch off ignition.
Follow instructions for disconnecting and connecting
battery,
refer to General information MG 12.
Disconnect battery negative lead from battery.
Unscrew and remove splash guard.
Cars without primary catalytic converters only (M60/M62):
Unscrew screw.
Press cable guide to one side.
Unfasten screws.
Remove shield plate.
Cars with primary catalytic converters only (M62):
Unclip battery positive lead (1).
Unfasten screws (2).
Remove shield plate (3).
RA Removing and installing/replacing starter (M60, M62)
BMW AG - TIS
11.02.2013 07:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -