7 Series E38 740i (M60-2) SAL
Remove vacuum hose from fuel pressure regulator.
Unfasten screw connection on injection tube.
Remove injection tube together with injector valves.
Unclip and remove circlip.
Remove injector valves.
Installation:
Check seals on injector valves and replace if necessary.
Before installing injector valves, coat seals with acid-free grease.
Check fuel injectors for leaks and clean,
refer to 13 63 582.
RA Replacing all injector valves (M60, M62)
BMW AG - TIS
11.02.2013 07:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -