7 Series E38 740i (M60-2) SAL
Unscrew the fuel filling pipe below.
Unscrew the fuel filling pipe above.
Pull the fuel filling pipe completely out of the rubber gaiter at the
wheel housing.
Caution!
After installing the fuel filling pipe, check the electric resistor
between the ground lug (tank filling pipe) and the wheel hub.
Measured value: approx. 0.6
Ω
RA Removing and installing or replacing fuel filler pipe
BMW AG - TIS
11.02.2013 07:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -