7 Series E38 740i (M60-2) SAL
18 00 020
Removing and installing complete exhaust
system (M52, M60, M62)
M52/B28, M60, M62
If necessary, remove rear underbody protection and heat baffle
plate from front axle support.
Unfasten mount on exhaust catalytic converter from back of body.
M52/B28, M60, M62
Support exhaust system with special tool 31 2 220.
(weight approx. 53 kg)
M60, M62
Disconnect left and right plug connections on Lambda oxygen
sensors.
Unclip cable.
M60, M62
Detach exhaust system at exhaust manifolds.
Installation:
Replace sealing ring,
refer to 18 11 015.
Note:
(1)
Without sealing ring (outer)
(2)
With sealing ring (inner)
RA Removing and installing complete exhaust system (M52, M60, M62)
BMW AG - TIS
11.02.2013 07:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -