7 Series E38 740i (M60-2) SAL
Remove left and right heat shields.
Unflange propeller shaft and tie up to one side.
Unclip cable for lambda oxygen sensors and reversing light switch
on cross-member.
Support transmission with a workshop hoist.
Unfasten screws and remove cross member.
Tightening torque, 23 71 2AZ .
Remove selector rod joint from selector shaft.
RA Replacing radial seal on selector shaft (S6S 420G)
BMW AG - TIS
11.02.2013 08:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -