7 Series E38 740i (M60-2) SAL
Remove heat shield on left front axle support.
Remove bracket for oil lines on engine oil pan.
Place oil container below.
Unfasten screw and remove oil lines.
Installation:
Replace O-rings.
Support transmission with special tool 00 2 030 / 24 0 170.
Unclip cable for oxygen sensors on transmission cross-member.
Unfasten screws and remove transmission crossmember.
Installation:
Tightening Torque,
refer to Technical Data 24 71 1AZ
RA Removing and installing automatic transmission (A5S 560Z)
BMW AG - TIS
11.02.2013 08:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -