7 Series E38 740i (M60-2) SAL
24 00 007
Adjusting shift lever (A5S 310Z/ A5S 440Z/
A5S 560Z)
Move selector lever to "P" setting.
For cable clamping up to 8.95:
Fit special tool 24 5 240 to the shift lever.
Note:
Only possible to fit in "P" setting.
Loosen nut (2).
Press shift lever (3) forwards (park setting). Press cable (4) in
direction of arrow, then release again.
Tighten nut (2).
Tightening torque,
refer to Technical Data 25 16 2AZ
Cable clamping from 8.95:
Brace clamping section (1) and loosen nut (2).
Press shift lever (3) forwards (park setting). Press cable (4) in
direction of arrow, then release again.
Brace clamping section (1) and tighten nut (2).
Tightening torque,
refer to Technical Data 25 16 2AZ
RA Adjusting shift lever (A5S 310Z/ A5S 440Z/ A5S 560Z)
BMW AG - TIS
11.02.2013 08:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -