7 Series E38 740i (M60-2) SAL
24 11 008
Removing and installing/sealing or
transmission oil sump
Drain off oil.
Version with oil filler pipe:
Remove filler neck (1).
Unscrew oil pan.
Take off oil sump with seal.
Installation:
Fit bracket with straight shoulder on side or fit concave
bracket to front and rear.
Tightening Torque, refer to Technical Data 24 11 5AZ
Clean oil sump.
Caution!
Install magnetic shims (1 and 2) in oil pan.
Check seal (3), replace if necessary.
RA Removing and installing/sealing or transmission oil sump
BMW AG - TIS
11.02.2013 08:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -