7 Series E38 740i (M60-2) SAL
Lift off clutch "B".
Note:
Note configuration of thrust bearing on "A" clutch.
For installation, assemble the complete drive unit and install.
While doing so, rotate drive unit backwards and forwards until all
discs engage with one another.
When correctly fitted, cylinder "B" must locate in the pot recesses
in such a way that only a gap of A = approx. 1 mm is visible.
Insert new brake band:
Note:
If the old brake band is reused, fit it the same way round again
(do not reverse the direction).
RA Replacing input clutch "B"
BMW AG - TIS
11.02.2013 09:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -