7 Series E38 740i (M60-2) SAL
Apply Special Tool 24 1 180 and clamp tight on converter support
shaft.
The oil pump housing is pressed out by turning spindle (1) in.
Lift out oil pump housing.
Remove Special Tool 24 1 180.
Calculate thickness of shim required:
If the oil pump housing is replaced or other work is carried out
which may affect axial clearance, it must be checked and
corrected if necessary.
Insert existing spacer disc (1), needle bearing (2), and thrust
washer (3) with collar facing the needle bearing.
Installation:
Note O-ring.
RA Replacing oil pump housing
BMW AG - TIS
11.02.2013 09:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -