7 Series E38 740i (M60-2) SAL
25 16 051
Removing and installing or replacing shift
lever bracket
Move selector lever into "P" setting.
For cable clamping up to 8.95:
Fit special tool 24 5 240 to the shift lever.
Note:
This can only be fitted in "P" position.
Loosen nut (1).
Installation:
Adjust shift lever,
refer to 24 00 007.
Cable clamping from 8.95:
Brace clamping section (1) and loosen nut (2).
Installation:
Adjust shift lever,
refer to 24 00 007.
Lift out retaining plate (1) with a screwdriver. Remove cable (2).
RA Removing and installing or replacing shift lever bracket
BMW AG - TIS
11.02.2013 09:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -