7 Series E38 740i (M60-2) SAL
Remove propeller shaft.
Note:
To illustrate more clearly, operation is shown here on removed
final drive unit.
Lift out retaining plate.
Mark position of nut (1) to drive shaft with a center punch.
Brace drive flange with special tool 23 0 020 and release nut.
Detach drive flange with special tool 33 1 150 .
RA Replacing shaft seal for input flange on final drive
BMW AG - TIS
11.02.2013 10:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -