7 Series E38 740i (M60-2) SAL
Loosen the nuts and pull the master brake cylinder out of the
brake unit.
Installation:
Replace self-locking nuts.
Tightening torque,
refer to Technical Data 34 31 1AZ
Installation:
Replace O-ring.
Fill expansion tank up to "MAX" mark with new brake fluid, refer to
BMW Service Operating Fluids.
Check seal (1).
RA Removing and installing / replacing master brake cylinder
BMW AG - TIS
11.02.2013 11:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -