7 Series E38 740i (M60-2) SAL
35 51 003
Removing and installing damper for footbrake
lever
Remove lower left trim from instrument panel.
Remove air duct.
Remove glovebox flap.
If necessary, open retaining pin (1) on both ball heads and pull off.
Installation:
Replace retaining pin (1).
Press gas strut off mount and press off footbrake lever.
RA Removing and installing damper for footbrake lever
BMW AG - TIS
11.02.2013 11:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -