7 Series E38 740i (M60-2) SAL
37 14 512
Replacing rear ride-height sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
After installation:
•
Check headlight adjustment, correct if necessary
Pull off plug (2).
Release nut (3) and disconnect control rack.
Release screws (1) and remove ride-height sensor.
Installation:
Lever (4) points outwards.
Tightening torque 37 14 6AZ / 7AZ / 9AZ
.
RA Replacing rear ride-height sensor
BMW AG - TIS
11.02.2013 12:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -