7 Series E38 740i (M60-2) SAL
37 21 005
Checking function of level control pump
Check oil level,
refer to 32 13 006.
After completion of function check, oil level must be
checked once again.
Remove splash guard.
Unfasten line (3) to control valve on the power steering pump.
Installation:
Replace gaskets. Tightening torque,
refer to Technical Data 32 41 3AZ.
Prepare special tool 32 4 000 or 54 3 100.
1 = Pump connection
2 = Connection for line to control valve
Attach special tool 37 2 021 / 022 and install between pump and
line.
RA Checking function of level control pump
BMW AG - TIS
11.02.2013 12:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -