7 Series E38 740i (M60-2) SAL
Open rear door.
Note:
In E38 L7, open center door,
refer to 41 35 470
Mount special tool 41 5 040 at distance of
A = 100 mm
from the roof edge, check the distance dimension and correct if
necessary.
Note:
Distance dimension OK:
Test surface with green identification mark can be pushed in at the
indicated position between the front side door and the B-pillar, test
surface with red identification mark cannot be pushed in.
Distance dimension not OK:
Test surface with red identification mark can be pushed in at the
indicated position between the front side door and the B-pillar
(distance too great).
Neither of the two test surfaces can be pushed in at the indicated
position between the side door and the B-pillar (distance too
small).
RA Door joint sizes/engine hood and trunk lid
BMW AG - TIS
11.02.2013 12:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -