7 Series E38 740i (M60-2) SAL
Drill out holes for plug welding at spare front wheel arch in
connection point between wheel arch / engine support.
Clean up connection point.
Note:
The diagram shows the front wheel arch without attached carrier
support.
Install and secure front wheel arch with straightening kit.
Weld up front wheel arch.
Note:
For clearer illustration, shown with straightening kit removed.
The diagram shows the front wheel arch without attached
carrier support.
Weld together connection points between wheel arch / end wall,
wheel arch / carrier support and
wheel arch / carrier plate.
Weld together connection point on wheel arch / carrier plate.
RA Replacing front left wheel arch
BMW AG - TIS
11.02.2013 12:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -