7 Series E38 740i (M60-2) SAL
41 62 000
Removing and installing luggage
compartment lid
Note:
Engine hood was fitted and bolted in an unfinished body
shell.
Unpainted surfaces become visible after subsequent
movement.
These surfaces must be touched up with paint in the body
color.
The luggage compartment lid wire harness does not have a point
of connection.
Wire harness must be removed from the luggage compartment lid
to remove the luggage compartment lid.
Mark position of trunk lid on the hinges
(this means no adjustment is required after fitting).
Loosen left and right bolts (1).
Unscrew left and right bolts (2).
Take off luggage compartment lid toward rear.
RA Removing and installing luggage compartment lid
BMW AG - TIS
11.02.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -