7 Series E38 740i (M60-2) SAL
Unfasten top fasteners (1) and lift fresh air grill upwards and
forwards to remove.
Note:
Also detach the fasteners mounted directly on the brake air
ducts.
Installation:
Install at bottom (2) then clip in at top (1).
Unfasten screws and remove foglight bracket (1) at left/ right.
Unfasten expanding rivet (2) and lift brake air ducts inwards to
remove.
Installation:
Insert lugs (3) on brake air ducts correctly in the recesses.
Lift out expanding rivets (1) and remove plastic cover on bumper
carrier.
Installation:
The plastic lugs must not be damaged. Replace if necessary.
RA Replacing front bumper
BMW AG - TIS
11.02.2013 13:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -