7 Series E38 740i (M60-2) SAL
51 31 200
Removing and installing rear window
Note:
Glue for cold and hot processing is permissible when gluing
rear window.
Remove and install both panels for rear roof pillar (C-pillar),
refer to 51 43 251.
Cold processing:
Comply with instructions on gluing windows,
refer to 51 31 ...
Warm processing:
Open aluminum membrane at rear end of cartridge.
Place cartridge in cartridge oven.
Heat glue cartridge for one hour in cartridge oven (Sourcing
Reference BMW Parts Service) at 80
°
C.
refer to 51 31 ...
Disconnect right plug connection (1) (locking circuit).
RA Removing and installing rear window
BMW AG - TIS
11.02.2013 14:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -