7 Series E38 740i (M60-2) SAL
Mount and press seal on to rear window glass at bottom.
Fit seal (1) at top in center of rear window and press downwards.
Note:
Seal (1) and rear window are marked in the middle (2).
Caution!
The basic filler must have hardened!
Pull adhesive tape off body aperture all around. Mask headliner on
roof connection with paintwork masking tape.
Treat body around glued area with BMW-approved materials
(repair kit, Sourcing Reference: BMW Parts Service),
refer to 51 31 ...
Note:
Note specified ventilation time!
Cut nozzle to size.
(A) 7 mm
(B) 10
-1
mm
Note:
For an even application of adhesive bead:
Use pneumatically or electrically powered cartridge gun
(sourcing reference: BMW Parts Service).
Note expiry date of glue!
RA Removing and installing rear window
BMW AG - TIS
11.02.2013 14:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -