7 Series E38 740i (M60-2) SAL
Installation:
Fit outer plastic nuts with knurling (2) facing finisher and fit
internal plastic nuts with hex (1) facing finisher (risk of
damage to passenger airbag).
Fit plastic nut on lower finisher with knurling (2) facing the finisher.
Unfasten screws (1) and pull glovebox cover (2) backwards to
remove. Unfasten screw (3) and pull trim (4) (corner piece)
backwards to remove.
Remove screws (1 and 2).
Note:
Screws (1) are socket head cap screws.
Unclip wooden finisher (1) and, if necessary, remove connector
(Tempomat). Unclip wooden finisher (2) and remove connector.
Remove cable connector from light switch (3).
RA Removing and installing dashboard trim panel
BMW AG - TIS
11.02.2013 14:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -